More copper out. Cleaner water back.

technology
material science division

CUPRIX is a biopolymer formulation being developed by Super Copper and MetaFLO Technologies to recover dissolved copper from mine process streams and return cleaner water for reuse: our shot at a better answer to the volumes of water and reagents copper mining consumes.

Joint laboratory

São Paulo, Brazil, operated by Super Copper and MetaFLO

Program stage

First bench demonstration complete (Aug 2026) , entering quantitative validation

Built for

Copper miners and processors worldwide

Working with a copper-bearing process stream?

If you run a leach, SX-EW, or process-water circuit and would like to learn how we can help, get in touch.

why it matters

The next ton of copper will cost more water, acid, and remediation.

Declining ore grades, rising capital costs, few discoveries and long lead times mean the next tonne of copper will come from lower-grade ore, leached with more acid, processed with more water, and leaving more residue behind. A reagent that measurably improves any one of those three parameters goes straight to a mine's cost curve.

23.2 Mt

copper mined worldwide in 2025 ¹

25%

potential supply shortfall by 2035 on the current mine pipeline ²

[01]

Water

Copper processing is water-intensive, and many of the largest copper districts are arid. In Chile, seawater is projected to supply about 68% of copper mining's water by 2034, roughly three-quarters of it desalinated.⁴ Every cubic metre a mine can recycle is one it does not have to source, desalinate or pump.

[02]

Tailings

Mining generates an estimated 13 billion tonnes of tailings a year,³ and copper is among the largest contributors. Copper tailings are projected to keep rising until at least mid-century as grades fall.⁵ Conditioning tailings and recovering the water held in them is a daily task at every concentrator in the world.

[03]

Acid

Sulphuric acid is among the largest reagent costs in oxide-copper leaching, and leach–SX-EW operations supply a meaningful share of the world's copper. Reducing acid per tonne, or recovering more copper for the acid already spent, goes straight to the cost curve.

Aerial view of a former copper mine with its tailings and acidic pit lake
sources
  1. International Copper Study Group, World Copper Mine Production 2025 (Monthly Copper Bulletin, 2026).
  2. International Energy Agency, Global Critical Minerals Outlook 2026.
  3. International Council on Mining and Metals, GISTM Tailings Progress Report (December 2025).
  4. Cochilco, Proyección del Consumo de Agua en la Minería del Cobre 2025–2034 (2026).
  5. Nature Sustainability, Global copper tailings distribution and projection (2026).
Blue copper-bearing solution in the bench tank before dosing
[01]
A measured dose being added to the tank by pipette
[02]
The solution turning green and cloudy as a solid forms
[03]
A settled layer of solid at the base of the tank with liquid above it
[04]
the process

One reaction. Two potential outcomes.

In oxide-copper operations, sulphuric acid dissolves copper from crushed rock into solution. Before process water can be reused, dissolved metals usually have to come out, commonly with lime, which raises pH so metals form solids that settle and filter. CUPRIX is being developed as a potential alternative or complement to that step for certain copper-bearing streams.

[01]
Copper-bearing water

An acidic process stream carrying dissolved copper.

[02]
Add CUPRIX

The biopolymer formulation is dosed into the stream.

[03]
A recoverable solid forms

A settleable, filterable solid separates from the liquid.

[04]
Settle and filter

Solids are recovered; the liquid passes through.

Output A

Recovered solid

Advanced toward a metallic product.

A piece of raw copper metal with a bright crystalline surface, on black
Output B

Cleaner water

For potential reuse or further treatment.

Clear water in motion against a deep blue-green background

The same separation step creates value in two directions at once: copper recovered that would otherwise stay in solution, and water that is cleaner for recycling or further treatment.

CUPRIX is being tested to do this selectively, efficiently and economically against conventional treatments. Program development is currently underway.

The bar is set before the numbers come in.

success criteria
Recovered solid and a used filter disc from the first bench demonstration

The quantitative phase benchmarks CUPRIX against untreated controls and conventional treatment. These are the criteria the Company has set for successful development.

[01]

Leach recovery

A statistically significant, reproducible improvement in copper extraction or leaching kinetics versus untreated controls on the same material, with incremental copper value exceeding reagent cost, net of any change in acid consumption.

[02]

Process water

Dissolved copper and other regulated metals reduced to applicable discharge or reuse standards, benchmarked head-to-head against lime on sludge volume, settling, dewatering, filtrate quality and cost per cubic metre.

[03]

Every workstream

Replicated in triplicate at the joint laboratory, with check assays by an independent accredited laboratory.

program roadmap

Methodical, measured, and reported as milestones are met.

CUPRIX is in development stage. The sequence below is the intended path, and each step depends on the one before it. Exploration at Cordillera Cobre and Castilla continues in parallel.

Aerial view of a terraced open pit with turquoise water at its base

Updates are published as meaningful technical results and development milestones are achieved.

  1. January 2025 · COMPLETE

    Initial Development

    Strategic agreement with MetaFLO Technologies, initiating product development.

  2. August 2026 · COMPLETE

    First bench demonstration

    Qualitative demonstration at the joint laboratory in São Paulo, completed in September 2026.

  3. Now · In progress

    Quantitative validation

    Measuring copper recovery, kinetics, selectivity, reagent dose, acid impact, settling and dewatering behaviour, filtrate quality, sludge characteristics and cost.

  4. Next · Subject to bench validation

    Field trials

    Testing under commercial operating conditions with industry partners.

  5. Then · If viable

    Commercial deployment

    Commercial deployment recommendations for copper mining and processing operations.

Built with Real Chemistry

the partnership

MetaFLO develops and markets proprietary solidification and biopolymer solutions for industrial applications (mining, oil and gas, soil stabilisation, dust suppression, liquid-waste solidification and environmental remediation), tailored to each customer's process. Super Copper and MetaFLO operate a joint laboratory in São Paulo, Brazil, where CUPRIX is being developed under the strategic development agreement signed in January 2025.

Super Copper
MetaFLO Technologies
metaflotech.com
“The next step is to put numbers around what we observed and determine how efficiently, selectively and economically the process can perform under real operating conditions.”
Laurent Serra, Chief Scientist, MetaFLO
“The CUPRIX program represents an opportunity for Super Copper and MetaFLO to build something that could ultimately extend well beyond a single project or deposit. Initial testing has moved the program from concept into a tangible product that people can actually see.”
Zachary Dolesky, Chief Executive Officer, Super Copper
Close view of a blue-green copper mineral growing on dark brown rock

Subscribe NOW

Get the latest Company news and announcements straight to your inbox.

SUBSCRIBE NOW
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.